1740 RPM - Washdown Motor

The Baldor CWDL3504 is a motor engineered to endure applications that experience frequent wash downs during operation making it perfect for car washes. Designed with a totally-enclosed fan-cooled enclosure and a 56C frame. It tolerates a maximum speed of 1740 RPM.

CWDL3504 Specifications:

• Enclosure: TEFC
• Frame: 56C
• Frame Material: Steel
• Frequency: 60.00 Hz
• Motor Letter Type: Cap Start, Induction Run
• Output @ Frequency: .500 HP @ 60 HZ
• Phase: 1
• Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
• Voltage @ Frequency:
  • 230.0 V @ 60 HZ
  • 115.0 V @ 60 HZ
• XP Class and Group: None
• XP Division: Not Applicable
• Agency Approvals:
  • CSA
  • UR
• Ambient Temperature: 40 °C
• Auxillary Box: No Auxillary Box
• Auxillary Box Lead Termination: None
• Base Indicator: Rigid
• Bearing Grease Type: Polyrex EM (-20F +300F)
• Blower: None
• Current @ Voltage:
  • 3.500 A @ 230.0 V
  • 7.000 A @ 115.0 V
  • 3.450 A @ 208.0 V
• Design Code: N
• Drip Cover: No Drip Cover
• Duty Rating: CONT
• Efficiency @ 100% Load: 66.0 %
• Electrically Isolated Bearing: Not Electrically Isolated
• Feedback Device: NO FEEDBACK
• High Voltage Full Load Amps: 3.5 a
• Front Face Code: Standard
• Front Shaft Indicator: None
• Heater Indicator: No Heater
• Insulation Class: F
• Inverter Code: Not Inverter
• KVA Code: L
• Lifting Lugs: No Lifting Lugs
• Locked Bearing Indicator: Locked Bearing
• Motor Lead Exit: Ko Box
• Motor Lead Termination: Flying Leads
• Motor Lead Quantity/Wire Size: 6 @ 18 AWG
• Motor Type: 3520L
• Mounting Arrangement: F1
• Number of Poles: 4
• Overall Length: 12.23 IN
• Power Factor: 70
• Product Family: Wash Down
• Pulley End Bearing Type: Sealed Bearing
• Pulley Face Code: C-Face
• Pulley Shaft Indicator: Standard
• Rodent Screen: None
• Service Factor: 1.25
• Shaft Diameter: 0.625 IN
• Shaft Extension Location: Pulley End
• Shaft Ground Indicator: No Shaft Grounding
• Shaft Rotation: Reversible
• Shaft Slinger Indicator: Shaft Slinger
• Speed: 1740 rpm
• Speed Code: Single Speed
• Motor Standards: NEMA
• Starting Method: Direct on line
• Thermal Device - Bearing: None
• Thermal Device - Winding: None
• Vibration Sensor Indicator: No Vibration Sensor
• Winding Thermal 1: None
• Winding Thermal 2: None