J Series Motor by Eaton 

The J Series by Char-Lynn is a group of motors with ample strength and lasting durability built into a compact package. In addition to utilizing integrated check valves, it offers high strength components in its construction. Given the impressive engineering, it's no surprise this J Series Char-Lynn motor sustains a maximum 1043 continuous RPM and 2030 continuous PSI. Operating temperatures range from -30 F at the low-end to 180 F at the top end. Continuous flow rate measures 5.5 GPM. 

The Char-Lynn J Series motor uses a shaft bushing that is self-lubricating, adding to its overall durability. Displacement measures cm3/r. When you look at the entire performance package, the J Series delivers a low speed, high torque motor ideal for car wash facilities and many other industrial uses! 

J Series Motor Specifications:

• Displacement: 1.21 In/R
• Maximum RPM-Continuous: 1043 RPM
• Continuous Torque: 333 In-LBS
• Continuous PSI: 2030 
• Continuous GPM: 5.5 
• Motor Port Size: 9/16-18 UNF-2B
• Motor Port Type: Straight Thread O-Ring SAE
• Output Shaft Size: 5/8 In Straight - Square Key
• Shaft Type: Straight
• Mounting Type: 5-Bolt - 1.239 In Pilot
• Seal Type: Standard
• Case Drain: 3/8-24 Unf-2b SAE O-Ring Ports
• Inlet and Outlet Port Size: Straight Thread O-Ring SAE 9/16-18 UNF-2B Ports Size 6
• Intermittent GPM: 6.5 
• Intermittent PSI: 2400 
• Peak Pressure: 3190 PSI
• Intermittent Torque: 405 In-Lbs.
• Peak Torque: 425 In-Lbs.

Features:

• Constant clearance Geroler set
• Integrated check valves
• Self-lubricating shaft bushing
• High-strength rigid components
• Increased valve seal lands
• High pressure seals
• Variety of displacements, shafts, mounts, and special options