Sensor Amplification Device

Amplifier is controlled by a µ-processor. Employs an 11-pin circular plug for easy connection. Features an NPN output & Alarm output. This device is able to perform self-diagnostic functions. 

Specifications:  

• 230: 195 To 265 VAC, 45 To 65 Hz
• Rated Operational Voltage (UB) Pins 2 & 10  
• 115: 98 To 132 VAC, 45 To 65 Hz 
• 024: 20.4 To 27.6 VAC, 45 To 65 Hz 
• 924: 20.4 To 27.6 VAC/DC Class 2
• Delay On Operate (Tv): < 300 Ms

Rated Operational Power:

• AC Supply: 3.3 VA 
• AC/DC Supply: 1.6 VA / 1.4 W

Outputs:

• Relay Rating (Agcdo): µ (Micro Gap) 
• Resistive Loads  
  
  • AC1: 8 A / 250 VAC (2500 VA) 
  • DC1: 0.2 A / 250 VDC (50 W) or 2 A 25 VDC (50 W) 
• Electrical Life (Typical) AC1: > 100.000 Operations

Transistor Output Data 

• Output Current (Ie) < 100 Ma @ 10-40 VDC 
• (Max. Load Capacity 100 Nf) 
• Voltage Drop (Ud) < 2,5 VDC @ 100 Ma

Output Function: Make Or Break On DIP-Switch 

• Relay: SPDT 
• Transistor: NPN / PNP, 100 Ma, 10-40 VDC 
• Alarm: NPN / PNP, 100 Ma, 10-40 VDC
• Delay On Alarm: 10 Sec

Test Input (Mute) NPN PNP 

• Emitter Enabled: > 5.0 VDC < VCC - 3 VDC 
• Emitter Disabled: < 3.0 VDC > VCC - 5 VDC 
• Imax @ 40 VDC: 1 Ma

Protection Output

• Transistor: Reverse Polarity, Short Circuit And Transients

Supply To Sensors

• Emitter: Pins 5 & 7
• Supply Voltage (Open Loop): 15 V Square Wave
• Current: < 450 Ma, Short Circuit Protected  
• Supply Voltage (Open Loop) 5 VDC 
• Short-Circuit Current 10 Ma 
• Input Resistance 470 _ 

Emitter Power 

• Power: Settings On DIP Switch No 4, 50 % Or 100 % Range 
• Sensitivity Adjustment 
• Manual: 240° Potentiometer 
• Automatic /Auto LED ON): Potentiometer Settings Fully Counter Clockwise 

Max. Sensing Distance: Maximum Range Indicated On Photoelectric Switch Data-Sheets In 100 % Settings 

Rated Insulation Voltage (UI): 250 VAC 

Dielectric Voltage >2.0 KVAC (Rms)(Contacts / Electronics) 

Rated Impulse Withstand Volt. 4 Kv (1.2/50 µs) (Contacts /Electronics) (IEC 664) 

Operating Frequency (F) 

• Light / Dark Ratio 1:1 
• Relay Output 20 HZ
• Transistor Output 20 HZ

Response Time 

• OFF-ON (Ton): 20 Ms 
• ON-OFF (Toff): 30 Ms

Environment

• Overvoltage Category: III (IEC 60664)
• Degree Of Protection: IP 20 /IEC 60529, 60947-1)
• Pollution Degree: 3 (IEC 60664/60664A, 60947-1)

Temperature 

• Operating: -20° To +50°c (-4° To +122°f) 
• Storage: -50° To +85°c (-58° To +185°f)

Housing Material NORYL SE1, Light Grey

• AC Supply: 200 G 
• AC/DC Supply: 125 G

Approvals: UL508, UL325*, CSA 
CE Marking: EN12445, EN12453**,EN12978