Valve with 1/2" Pipe Connections - 125 PSI

This normally open diaphragm valve is intended for water, air, light oil, and other non-corrosive liquid applications. The plunger is pulled to the top plug, which opens a small pilot port in the center of the diaphragm plate. This releases pressure on top of the diaphragm and allows incoming pressure to lift it off the large center port. When de-energized, the plunger is pushed from the top plug by a spring and closes the pilot port. 

Pipe Size: 1/2"

• CV flow factor #2
• Stainless steel body resists corrosion
• Normally open
• EPDM seal
• 120VAC spade coil
• Maximum pressure 125 PSI

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).