QMS Series Infitec Time Delay Module

Infitec QMS Time Delay Module uses C/MOS digital circuitry to create time delays up to 1000 minutes. Program fixed, local, or externally adjustable time delays with seven different modes of operation.

Features:

• 24 VAC 
• Small Size
• No First Cycle Effect
• Fully Solid State and Encapsulated 
• 0.5% Repeat Accuracy 
• Output Rated at 1 Ampere Continuous, 10 Amperes Inrush
• UL/cUL recognized

Specifications:

1. Time Delay

• 1.1 Type: C/MOS Digital Circuitry
• 1.2 Range: From 0.05 Seconds to 1000 Minutes Fixed Delays Available (See Time Delay Chart)
• 1.3 Repeat Accuracy: ±0.5% Under Fixed Conditions
• 1.4 Setting Accuracy: ±10%
• 1.5 Reset Time: 50 Milliseconds Maximum
• 1.6 Recycle Time: 100 Milliseconds During Timing 50 Milliseconds After Timing
• 1.7 Time Delay vs. Voltage and Temperature: ±2% 

2. Input

• 2.1 Operating Voltage: 24, 120, & 230 VAC 12, 24/28, & 36 VDC
• 2.2 Tolerance: ±20% of NOminal
• 2.3 Frequency: 50 - 60 Hertz

3. Output

• 3.1 Type: Solid State
• 3.2 Form: SPST
• 3.3 Rating: 1 Amp Steady State, (10 Amp Inrush, 20mA Min.)
• 3.4 Life: 100,000,000 Operations Minimum Under Full Load

4. Protection

• 4.1 Transient: ±1500 Volts for 150 Microseconds
• 4.2 Polarity: DC Units Are Reverse Polarity Protected
• 4.3 Dielectric Breakdown: 1500 Volts RMS Minimum

5. Mechanical

• 5.1 Mounting: One #8 or #10 Screw
• 5.2 Termination: 1/4" Quick Connect Terminals
• 5.3 Style: Surface Mount Encapsulated

6. Environmental

• 6.1 Operating Temperature: -20°C to +80°C
• 6.2 Storage Temperature: -30°C to +85°C
• 6.3 Humidity: 95% Relative Non-Condensing

Refer to manual for more technical breakdown.