35 GPH - Self-Priming Rotary Vane Pump

The Procon 101E035F11FC is a Series 1 rotary vane pump that is used to move fluid in the car wash, industrial, beverage, water treatment and medical applications. Engineered to operate with low vibration and pulsation. It features an integral strainer to remove harmful particles from fluid lines. It produces a maximum flow rate of 35 GPH and handles a maximum pressure of 250 PSI and speed of 2400 RPM. Both the inlet and outlet measure 3/8" with female NPT threading.

Specifications:

• Material: Brass
• Port Hole: NPT 3/8"
• Integrated Strainer: Yes
• Mounting Type: Bolt-On
• Drive Configuration: Single Flat
• Flowrate (GPH): 35 GPH
• Flowrate (LPH): 100 LPH
• Elastomer: EPDM/Nitrile
• Seal Type: Non Balances Ceramic/Carbon
• Rotation: Clockwise
• Internal Component Material: Carbon
• Valve Type: Bypass- Ultem
• Valve Configuration: External Adjust
• Operating Range:
• Maximum Mechanical Power Requirement: 0.29hp (216W)
• Maximum Operating Pressure: 60 PSI
• Relief Valve Set Pressure Range: 60 to 99psi (4 to 7 BAR)
• Max Static Pressure PSI: 100 PSI
• Min Operation Fluid Temperature: -4°F
• Max Operation Fluid Temperature: 160°F
• Max Fluid Viscosity: 100cP
• Max Sound Level: 60dB(a)
• Max Discharge Pressure: 250 PSI
• Min Speed: 1000 RPM
• Max Speed: 2400 RPM
• Dry Suction Lift: 3.3 ft.
• Wet Suction Lift: 6.6 ft.
• Fluid Acidity: 6pH
• Maximum Total Dissolved Solids (TDS): 5000ppm

Features:

• Consistent flow rate across variable pressures
• Self-priming (water) and maintenance-free with low vibration and pulsation characteristics
• Internal Relief Valve External adjust configuration
• Integral Strainer for debris removal from pumping fluid
• Brass Housing Material
• NPT 3/8" Inlet and Outlet Connections
• Constructed with EPDM/Nitrile Elastomers
• Flowrate of 35GPH (100LPH)*
• Fluid Operating Temperature of between -4°F to 160°F (-20°C to 71°C)
• Maximum Mechanical Horsepower required 0.29hp (216W)¹