Outdoor LED Wall Pack Light for Building Exteriors

This Jarvis WPFT-E Series Luminaire is an outdoor wall pack light designed to be mounted on the exterior of commercial buildings. It boasts a bronze color durable die-cast aluminum housing and a polycarbonate lens with high UV and impact resistance. The UV-resistant powder coating finish avoids fading and flaking.

This high-quality WPFT-E wall pack features a heat-radiating fin design that allows the luminaire to operate at a cooler temperature than competing LED luminaires, so it's an incredibly safe and energy efficient lighting solution. Professional light distribution with high lens pass rate offers maximum illumination with reduced glare. If you're replacing older, outdated halide and fluorescent luminaires, this wall pack is sized to cover the scars left by previous fixtures. The lumen output and color temperature are adjustable on this cost-effective wall pack, so you can choose exactly the brightness you need to properly light your property without wasting power, creating significant energy savings for your business!

Item Specifications

• Selectable Lumen Output: 3,240 lm (20W), 4,148 lm (25W), or maximum 6,161 lm (40W)
• Selectable CCT: 3000K/4000K/5000K
• Wattage: Maximum 40W
• Housing Construction: Heavy duty die-cast aluminum
• Housing Color: Bronze
• Input Voltage: 120-277V AC, 50/60Hz
• Power Factor: >.9 at full load
• Operating Temperature Range: -40⁰ to 104⁰ Fahrenheit
• Dimming/Control: 0-10V dim-to-off plus 12V auxiliary
• Total Harmonic Distortion: <20% full load - includes over voltage protection, overcurrent protection, and short circuit protection
• Jarvis SKU: WPFT-E-3ML6-30K/40K/50K-UV-BRZ-DTO

Key Features

• Cooler operating temperatures because of unique heat-radiating fin design
• Professional light distribution design with high lens pass rate ensures maximum illumination with reduced glare
• UV-resistant powder coat finish avoids fading and flaking
  Large enough to cover scars left over from previous lights being replaced
• 10-year limited manufacturer warranty
• Available factory installed integrated photocell for increased energy savings (please call before ordering to inquire about this option)

Ideal Applications for These Outdoor LED Wall Pack Lights

• Car Washes
• Stores
• Manufacturing Facilities
• Parking Lot Perimeters
• Walkways

Regulatory and Voluntary Safety Certifications

• UL listed to UL1598 and UL8750 for both US and Canada
• State of California Title 24 Compliant when installed in accordance with local requirements
• DesignLights Consortium (DLC) Premium qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
• Rated for Wet Locations

How Long Does a WPFT-E Wall Pack Last?

The projected lifespan of the LEDs in this wall pack exceeds 50,000 hours under most operating conditions. Lifetime projections are calculated using data including LM-79, LM-80 and TM-21 calculations.

Installation Tips

This wallpack is installed by mounting the baseplate to the wall. Wall materials and mounting conditions vary by structure and project – contact factory for suggesting which fasteners are optimal.
There are two ways to bring the electrical connections into the luminaire. One way is to pull them through the built-in threaded 1/2" NPS knock-outs located on the sides, top, and bottom of the fixture’s baseplate. You can also mount the luminaire over a recessed junction box. Front section of luminaire contains LEDs and optics, while the rear section contains the power supply. Front section connects to rear section via cast-in hooks and fasteners. Installation conditions often require sealing of fixture penetrations created during installation.

This light fixture is dimmable. CCT and wattage settings are adjusted using the switch inside the fixture housing. To access the switch settings, remove the 2 screws on the side of the fixture to open the housing.

Additional Construction and Material Information

• Die-cast aluminum housing cast from 383 (ADC12) alloy.
• Housing features a powder coat finish with UV protection to ensure color longevity. Powder coat finish is applied directly to aluminum housing and will not crack or peel. Default color is bronze.
• LEDs are reflow soldered to a metal core circuit board, providing greater thermal transfer than standard circuit board materials. Lens construction is polycarbonate material to provide specific light distribution.
• Contains zero glass or mercury.
• Stainless steel fasteners will not rust or create rust-streaks.