White Wall Pack LED Light

This Jarvis FlexPack LUMOS Series light is a sturdy wall pack fixture boasting a die-cast aluminum housing with a white powder coat finish. The white finish adds a significant protective benefit that adds years of life to the fixture, plus it has a clean, attractive modern look that will fit seamlessly into your property. Additionally, it has an impact resistant polycarbonate lens that is strong enough for outdoor use. This energy-saving lighting solution is ideal for installing on the exterior walls of commercial buildings like stores, car washes, and manufacturing facilities.

One of the important highlights of this wall pack is its versatile design that allows it to be adjusted for either full cut-off or forward throw applications. Unlike traditional wall packs and older halide or fluorescent light fixtures, this single fixture can be used for a variety of needs on your property. For full cut-off, position the baseplate with the large side up. The glass should be parallel with the ground and the lens is directed down and forward with zero light emitted above the horizon. For forward-throw, position the baseplate with the large side down. The lens will be tilted back to project light farther forward.

Item Specifications

• Wattage: 96W
• Lumens Output: 11,808 lm
• Housing Color: White
• Housing Construction: Die-cast aluminum
• Color Temperature (CCT): 5000K (Kelvin)
• Input Voltage: 120-277V AC
• Dimming/Control: 0-10V Dimming
• Mounting Height Recommendation: 10' to 20' from ground (dark-sky orientation), 12' to 18' from ground (forward-throw orientation)
• Dimensions: 8" width x 8" depth x 6.1" height
• Full Jarvis SKU: LUMOS-11L-50K-UV-WHT-DM
• Built-in photocell, Bluetooth control module, and Bluetooth sensors are available. Please call before purchasing to discuss these options with a Kleen-Rite representative.

Important Features

• Patented FlexPack Design
• White UV-resistant powder coat finish avoids fading and flaking
• LED optics provide uniform light pattern with minimal glare
• Impact resistant and tamper resistant polycarbonate lens
• 10-year limited manufacturer warranty
• Converts between a forward throw and a dark sky wall pack
  Housing designed with space for factory installed motion sensor
• Can be changed after install between forward throw and dark sky light throw

Ideal Applications for These Outdoor LED Wall Packs

• Car Washes
• Stores
• Manufacturing Facilities
• Parking Lot Perimeters
• Walkways
• Loading Docks

Advanced Electrical Specs

• Power Factor: >.9 at full load
• Total Harmonic Distortion: <20% full load Includes over voltage protection, over current protection, and short circuit protection
• Operating Temperature Range: -31⁰F to 104⁰ F Ambient (-35⁰C to 40⁰ C)

Safety and Regulatory Information

• ETL listed to UL 1598 and 8750 for both US and Canada.
  State of California Title 24 Compliant when installed in accordance with local requirements.
• DesignLights Consortium (DLC) Premium qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
• Fixture Protection Class IP64.
• Rated for Wet Locations.

Additional Construction and Material Information

• Die-cast aluminum housing cast from 383 (ADC12) alloy.
• Patented design integrates LED optics and fixture mechanicals into a single structure that acts as both the heat sink and the fixture housing, resulting in increased thermal continuity and decreased componentry.
• Front portion of housing can be installed onto baseplate of fixture in two positions. JARVIS LIGHTING Housing sections feature cast-in hooks and sections connect via hooks and fasteners. Each cast-in hook functions as a threaded receptacle when mounted in the opposite orientation.
• Die-cast housing features a white powder coat finish with UV protection to ensure longevity of color. Powder coat finish is applied directly to aluminum housing and will not crack or peel. Default color is bronze. Custom colors are available. Contact factory for additional color information.
• LEDs are reflow soldered to a metal core circuit board, providing greater thermal transfer than standard circuit board materials. The LED board is mechanically fastened directly to die-cast housing.
• Lens construction is a polycarbonate lens with forward and wide throw optics.
• Luminaire's construction contains zero mercury.
• Stainless steel fasteners will not rust or create rust streaks.

Warranty and Lifetime Details

LUMOS Series carries a 10-year limited warranty. Projected LED lifespan exceeds 50,000 hours under most operating conditions. Lifetime projections are calculated using data including LM-79, LM-80 and TM-21 calculations.

Installation Tips

Luminaire installs onto wall by mounting the luminaire’s baseplate to the wall. Wall materials and mounting conditions vary by structure and project – contact factory for suggesting which fasteners are optimal. Mount the baseplate with the larger side on top to install luminaire in the full cut-off orientation or with the larger side on the bottom to install luminaire in the forward-throw orientation. Electrical connections can be brought into the luminaire either through threaded 1/2 inch NPT knock-outs (located on the sides, top and bottom of the fixture’s baseplate) or by mounting the luminaire over a recessed junction box. Front section of luminaire contains LEDs and optics, while the rear section contains the power supply. Front section connects to rear section via cast-in hooks and fasteners. Installation conditions often require sealing of fixture penetrations created during installation.

Additional Controls and Dimming Details

The LUMOS series dimmable standard is 0-10V. Dimming leads are accessible inside the fixture.
The LUMOS series is compatible with both Jarvis Lighting’s PhotoMotion PIR sensors and network lighting control system. The network lighting control system allows the lights to communicate with each other via Bluetooth® signal. Systems are typically capable of grouping, controlling and dimming lights through a number of methods including motion sensors, photo sensors, schedules, manual Bluetooth switches and more. PhotoMotion sensors provide multi-level control based on both motion and/or ambient natural lighting levels and can be custom programmed via remote control. The LUMOS series is compatible with most controls including motion sensors and photosensors. Motion sensors and photosensors can be mounted into knockouts on sides of housing.

LED to Incandescent Bulb Comparison

LEDs use significantly less energy to produce the same amount of brightness as incandescent bulbs. In fact, an LED can use up to 90% less energy to produce the same number of lumens. For example, this 96-watt LED wallpack would be approximately the equivalent of an 800-watt incandescent light fixture. Finding energy-efficient lighting is an excellent way to save your business money and potentially stay within green eco-friendly requirements in your area.