LED Canopy Light with Adjustable Color Temperature and Power

This Jarvis JDS-V Series LED Light is an ideal outdoor lighting solution for canopies at gas stations and car washes. It greatly enhances visibility, making it easier for customers to pump gas or vacuum their car while illuminating the area to create a safer environment. A drop lens allows the light to be easily seen from the road, attracting customers to your business. It has a die-cast aluminum housing with a white powder coated finish, along with a UV resistant single-piece polycarbonate lens that is impact resistant.

One of the significant features of these LED canopy light fixtures is their power/brightness adjustability. You can choose from three different levels to get the brightness you need without wasting any power. For example, one of your fuel or vacuuming station might be near your building, receiving residual light from wall sconces or other fixtures. In that case, you can opt for a lower power level on the canopy light and still sufficiently brighten the area with using excess energy. On a fueling or vacuuming station that's far away from the building and other lighting you can opt for the maximum brightness level. This versatility allows you to experiment and adjust to get exactly the lighting you need while saving money and remaining energy efficient.

Important Specifications

• Lumen Output: Selectable between 13,000 lm, 15600 lm, and 20842 lm (maximum)
  Wattage: Selectable between 100W, 120W, and 150W
• Voltage: 120-277V
• Color Temperature (CCT): Selectable between 3500K, 4000K, and 5000K
• Housing Construction: Die-cast aluminum
• Housing Color: White
• Lens Material: Polycarbonate
• Dimmable Functionality: 0-10V dimming
• Full Jarvis SKU: JDS-V-13ML19-35K/40K/50K-YY-UV-DRP-WHT-DM

Ideal Applications for this Canopy LED Light

• Gas Stations
• Car Washes
• Parking Garages
• Store Parking Lots
• Walkways

Additional Electrical Specifications

• Power Factor: >0.9 at full load
• Total Harmonic Distortion: <20% full load
• Operating Temperature Range: -40º to 113º Fahrenheit Ambient
• Power supply includes internal 6kV surge protection

Construction and Material Details

• Housing is constructed from die-cast aluminum and finished with a corrosion resistant powder coating applied directly to housing - will not crack or peel. Default white color.
• Lens construction is single-piece, UV resistant, impact resistant polycarbonate
• Contains zero mercury
• Fasteners are stainless-steel and will not rust or create rust streaks

Controls and Dimming

• 0-10V dim-to-off dimming leads
• The JDS-V Series is compatible with many other photosensors and motion sensor systems. Contact a Jarvis representative if you need more information

Qualifications and Certifications

• UL certified to UL 1598 for both US and Canada
• State of California Title 24 Compliant when installed in accordance with local requirements
• Rated for Wet Locations
• Rated to IP65

Warranty and Estimated Lifetime

• The JDS-V Series carries a 10-year manufacturer limited warranty.
• Projected LED lifetime exceeds 50,000 hours under most operating conditions. Lifetime projections are calculated using data including LM-79, LM-80 and TM-21 calculations.

Installation Information

• JDS-V Series installs into a standard gas station canopy deck via 4 self-drilling screws and a center mounting hole for wiring connections to junction box on the topside of the canopy.
• Installs in a 12" or 16" deck pan. Surface mount boxes are available. Lumen output and CCT can be set during installation via 2 dipswitches located behind a knockout locked on the side of the fixture.

Photometrics

Photometric information, including LM-79 reports and .IES files are available for most models at www.jarvislighting.com. Site photometrics and lighting layouts are available. For complete information, contact Jarvis directly.